|
|
The Gates 13A0940 is a 13mm top width x 940mm moulded-notch V-belt (fan belt) for engine accessory drives such as the alternator, water pump, fan and power steering pump.
Brand: Gates | Top Width: 13mm | Length: 940mm | Outer Length: 949mm | Part No: 13A0940
or four payments of $14.97
with
Learn More
Gates V-belts use a fibre-loaded neoprene (polychloroprene) compound for heat and wear resistance, moulded notches that reduce bending stress around small pulleys, and form-ground sidewalls for a precise fit in the pulley groove. In the Gates size code, 13A is the 13mm top width and 0940 is the 940mm belt length.
Listed applications include the Mazda B-Series, Nissan Navara, Ford Cortina and Mitsubishi Express - see the Applications tab for engines and years. Fitment can vary with engine and accessory options, so check against the old belt before fitting. Replace belts that are cracked, glazed or frayed, and set tension to the maker's specification - an over-tight belt wears bearings, a loose one squeals and slips.
| Specification | Value |
|---|---|
| Brand | Gates |
| Belt Type | Moulded-notch V-belt |
| Top Width | 13mm |
| Length | 940mm |
| Outer Length | 949mm |
| Belt Angle | 36° |
| Material | Polychloroprene (neoprene) |
| Part Number | 13A0940 |
| Make | Models | Years | Engines |
|---|---|---|---|
| Mazda | B-Series, 323, 626 | 1979-2006 | G6, B6 |
| Nissan | Navara, Pulsar | 1987-2005 | KA24DE, KA24E |
| Ford | Cortina, Econovan, Courier | 1974-2006 | FE, 200ci |
| Mitsubishi | Express, Starwagon, Pajero | 1984-1996 | 4G64, 6G72 |
| Holden | Gemini, Gemini Panel Van | 1978-1985 | G161-Z |
Main applications shown - fitment can vary by engine and accessory options. Confirm against the old belt before fitting.
Locally owned Nelson specialists in auto, marine & 4WD parts. Your partner in parts for over 35 years.
|
© Copyright YOUNGS AUTOMOTIVE LTD - Site Map Phone: 03 5489014 Nelson New Zealand |
