|
|
The Gates 11A0850 is an 11mm top width x 850mm moulded-notch V-belt (fan belt) for engine accessory drives such as the alternator, water pump, fan and power steering pump.
Brand: Gates | Top Width: 11mm | Length: 850mm | Outer Length: 865mm | Part No: 11A0850
or four payments of $4.96
with
Learn More
Gates V-belts use a fibre-loaded neoprene (polychloroprene) compound for heat and wear resistance, moulded notches that reduce bending stress around small pulleys, and form-ground sidewalls for a precise fit in the pulley groove. In the Gates size code, 11A is the 11mm top width and 0850 is the 850mm belt length.
Listed applications include the Fiat 124, Holden Commodore, Alfa Romeo 33 and Toyota Corona - see the Applications tab for engines and years. Fitment can vary with engine and accessory options, so check against the old belt before fitting. Replace belts that are cracked, glazed or frayed, and set tension to the maker's specification - an over-tight belt wears bearings, a loose one squeals and slips.
| Specification | Value |
|---|---|
| Brand | Gates |
| Belt Type | Moulded-notch V-belt |
| Top Width | 11mm |
| Length | 850mm |
| Outer Length | 865mm |
| Belt Angle | 36° |
| Material | Polychloroprene (neoprene) |
| Part Number | 11A0850 |
| Make | Models | Years | Engines |
|---|---|---|---|
| Fiat | 124, 132, 125 | 1967-1977 | 132 B1.000, 124B21 |
| Holden | Commodore, Berlina | 1986-1988 | RB30E, RB30ET |
| Alfa Romeo | 33 | 1986-1994 | AR 30747, AR 30550 |
| Toyota | Corona, Celica, T-18 | 1973-1982 | 18R, 18R-C |
| Audi | 80 B3 | 1986-1990 | 3A, JN |
Main applications shown - fitment can vary by engine and accessory options. Confirm against the old belt before fitting.
Locally owned Nelson specialists in auto, marine & 4WD parts. Your partner in parts for over 35 years.
|
© Copyright YOUNGS AUTOMOTIVE LTD - Site Map Phone: 03 5489014 Nelson New Zealand |
